Contact Us

Canadian Integrated Petro Group Ltd.
Suite 300, ​400 5th Ave SW
Calgary, T2P 0L6

Phone/Fax: +1 403-264-9215

Email: Support@CIPGroup.ca 

Questions?

Call +1 403-816-9012 or use our contact form, Support@CIPGroup.ca 

Get Social With Us

Recommend this page on:

Projects Contributed by CIP Team

Major projects contributed by CIP Team falls into the following categories

 

LAB Experience

Petrophysical Log Interpretaion

Geological Modeling

Reservoir Model Study

Enhance Oil Recovery

Geomechanical Modeling

Surface Facility Design

 

Project from all over the world such as

 

Canada, USA, Mexico, Russia, Venezuela, Kuwait, Iran, South Africa, Egypt, Syria

Complex Reservoir

Fractured, Heavy Oil, Low porosity, Fluvial Channel

 

For more details please refer to CIPG CVs and for additional questions about our projects, feel free to call us at +1 403-264-9215 or to contact us via the contact form,   Support@CIPGroup.ca 

 

Petrophysical Log Interpretation

McMurray and Wabiskaw SAGD & CSS – Canada

Texaco pilot project: Silt and mudstone buffer modeling (45 wells);
Axe Lake project: Initiated variable Rw modeling (190 wells);
Clearwater West: Sw modeling over air filled intervals (21 wells);
Kirby Lake: FZI permeability and
 Swirr modeling (23 wells).

 

Horn River Basin, Duvernay, and Montney – Canada

Dixonville Montney: Calibrating Shale oil model based on CMR/ECS logs (24 wells);

Duvernay Strategic Basin Study and Wilson Creek area with one of the operators;

Horn River Basin Study, developed a shale gas model using conventional logs (37 wells).

 

Weyburn (Saskatchewan) – Canada

Enhanced Oil Recovery Carbonate Reservoir, Key well evaluations, global uncertainty calculations over old model outputs, and Klinkenberg and stress correction permeability calculations (926 wells).

 

Judy Creek-B – Canada

Enhanced Oil Recovery Carbonate Reservoir, Judy Creek-B Study, including 3D FZI perm modeling (112 wells).

 

Taber South (47 wells) – Canada

Field Development, including water-cut prediction modeling.

 

Carmangay (66 wells) – Canada

Field Development, including Litho-Facies and FZI permeability modeling.

 

Edson (125 wells) – Canada

Field Development, including infill drilling location evaluation and HF design.

 

Bigstone (281 wells) – Canada

Field Development, including infill drilling location evaluation and HF design.

 

Joffre (4 wells) – Canada

Field Development, infill drilling location evaluations, and HF design.

Makeevskoye, Olgivskoye, Vergunskoye - Ukraine.

Field Development.

 

Saskatchewan – Canada

Carbon Dioxide Capture and Storage Studies (CCS) for caprock integrity.

 

Saline Aquifer Project – Canada

Full field study, Carbon Dioxide Capture and Storage Studies (CCS).

 

Spectra Slave Point Project – Canada

Field study, Carbon Dioxide Capture and Storage Studies (CCS).

 

TharJath Field - Sudan

EOR project, Full field petrophysical study including J-Function water saturation model.

 

Issaran Field - Egypt

Conducted detailed multi-porosity type petrophysical evaluations, rock property modeling and hydraulic fracture design for a shallow dolomitic reservoir.

 

Mannville

CBM project: Managed and technically contributed in Mikwan coal seams characterization and Petrel 3D Earth modeling.

 

Hiswah EOR project - Yemen

Contributed on reservoir characterization phase of a fractured carbonate reservoir study.

 

Chinook Ridge Deep Basin - British Columbia, Canada

Tight Gas PowerSTIM project. Provided different petrophysical services such as FracCADE Advisor, Anisotropy, and Stoneley Fracture Advisors.

 

Willow Project – Alberta, Canada

Multi-disciplinary asset evaluation study incorporation with NITEC-LLC.

 

National Iranian Oil Company - Ahwaz, Iran

Supervised logging operations on well-site

Evaluation of numerous open hole and cased hole well-logs.

Performed hundreds of well-log quality and tool calibration controls during logging operations.

 

 

 

Geological Modeling /Study

Husky Energy, Northern Exploration - Canada

  • Core interpretation (facies analysis/interpretation of depositional environment)

  • Petrographic study

  • Subsurface correlation and mapping

  • Supervision of drilling operations

  • Land sale/farm-in evaluations

  • Exploration

 

Talisman Energy, Montney Project - Canada

  • Subsurface correlation and mapping

  • Integration of geological, geophysical, petrophysical, and core analysis data

  • Static reservoir modelling

 

Talisman Energy, Wild River Project - Canada

  • Integration of geological, geophysical, petrophysical, and core analysis data

  • Subsurface correlation and mapping

  • Static reservoir modelling

 

Encana Corporation Mikwan CBM Project - Canada

  • Subsurface correlation and mapping

  • Integration of geological, geophysical, petrophysical, and natural fracture/cleat data

  • Static reservoir modelling

 

Encana Corporation (now Cenovus Energy), Weyburn Field - Canada

  • Integration of geological, petrophysical, core analysis, and fracture data

  • Geological interpretation of core data (facies analysis)

  • Subsurface correlation and mapping

  • Static reservoir modelling

 

Enerplus Corporation, Giltege Project - Canada

  • Subsurface correlation and mapping

  • Integration of geological, geophysical, petrophysical, and core analysis data

  • Static reservoir modelling

 

Harvest Energy, Bashaw, Nisku Project - Canada

  • Integration of geological, geophysical, petrophysical, core analysis data

  • Interpretation of geophysical data

  • Geological interpretation of core data (facies analysis)

  • Subsurface correlation and mapping

  • Static reservoir modelling

 

CalValley Ltd, Hiswah Field - Yemen

  • Subsurface correlation and mapping

  • Integration of geological, geophysical, andpetrophysical data

  • Static reservoir modelling

 

WNPOC (White Nile Petroleum Operating Company (Sudan), Thar Jath  field  -  Sudan

  • Integration of geological, geophysical, andpetrophysical data

  • Subsurface correlation and mapping

  • Static reservoir modelling

 

Enerplus Corporation, Gleneath Project - Canada

  • Subsurface correlation and mapping

  • Integration of geological, geophysical, petrophysical, and core analysis data

  • Static reservoir modelling

 

Enerplus Corporation, Cardium Project - Canada

  • Integration of geological, geophysical, petrophysical, and core analysis data

  • Subsurface correlation and mapping

  • Static reservoir modelling

 

Murphy Oil Company, Seal Lake, Tupper, and Tupper West - Canada

  • Core interpretation (facies analysis/interpretation of depositional environment)

  • Petrographic study

  • Subsurface correlation and mapping

  • Supervision of drilling operations

  • Farm-in/out evaluations

  • Short and long-term development planning

  • Budgeting

  • Static reservoir modelling

 

Well Services of Iran (WSI), Cheshmeh Khosh - Middle East

This project was a Full Field study with comprehensive geological, petrophysical and geophysical data, geomodelling tasks started from scratch including facies definition. 

Petroleum Eng. & Dev. Co. (PEDEC), Azadegan Oil Field - Middle East

Middle East

 

Petroleum Eng. & Dev. Co. (PEDEC), Yaran Oil Field - Middle East

Geological modeling and Supervision & Technical Services on field development.

 

Petroleum Eng. & Dev. Co. (PEDEC), Darquain Oil Field - Middle East

Full Field reservoir study with comprehensive geological modeling to reservoir simulation.

 

Arvandan Oil and Gas Company, Sepehr Oil Field - Middle East

Under exploration reservoir study with limited data.

 

Iranian Offshore Oil Company (IOOC), Tosan Oil Field - Middle East

Supervising and leading the team.

 

National Iranian South Oil Company (NISOC), Naft Safid Oil Field - Middle East

Full Field Study, supervising the team and working on fracture modeling, complicated structure.

 

Mapna Group, Forooz B Gas Field - Middle East

Under exploration reservoir, Geoscience study, Preparing Master Development Plan.

 

Petroleum Eng. & Dev. Co. (PEDEC), Kish Gas field - Middle East

Full Field Study and MDP preparation, supervising and engineering services for appraisal well drilling.

 

Pars Oil and Gas Company (POGC), South Pars Gas Field - Middle East          

World largest gas reservoir, Full Field Developmental Study, detailed phase reservoir modeling and G&G and technical services for the development phase.

 

Petroleos de Venezuela S.A. (PDVSA), Ayacucho area; Magna Reservas - Venezuela 

Reservoir Characterization and Quantification of several blocks, extra heavy oil reservoir, planning development wells using LIDAR data.  

 

Iranian Center Oil Fields Co. (ICOFC), Danan Oil Field - Middle East

Full Field Study and MDP preparation.

 

Petroleum Eng. & Dev. Co. (PEDEC), Jufeyr Oil Field - Middle East

Reservoir Study and field development supervision.      

 

Petroleum Eng. & Dev. Co. (PEDEC), Kuh-e Mond Oil Field - Middle East

Peer review of the field’s MDP, Heavy oil reservoir 

 

Iranian offshore Oil Co. (IOOC), Nowrooz Oil Field - Middle East

Full Field Study, sandstone reservoir. Complicated structure with more than 90 faults and complex facies distribution. 

 

Iranian offshore Oil Co. (IOOC), Reshadat Oil Field - Middle East

Full Field Study and MDP preparation

 

Petroleum Eng. & Dev. Co. (PEDEC), Salman Oil Field - Middle East

Field Study and Geological Modeling updating, Field Development technical supervising and monitoring.

 

Petroleum Eng. & Dev. Co. (PEDEC), Salman Gas Field - Middle East

Field Study and Geological Modeling updating of the reservoir. Appraisal wells planning.

 

Petroleum Eng. & Dev. Co. (PEDEC), Nosrat Oil Field - Middle East

Reservoir Study and Field Development technical supervising and monitoring.

 

Petroleum Eng. & Dev. Co. (PEDEC), Farzam Oil Field - Middle East

Reservoir Study and Field Development technical supervising and monitoring.

 

 

 

Reservoir Model Study / EOR

Kuwait Oil Company (KOC),  Umm Niqa Field

Reservoir simulation modeling of Umm Niqa field, Fluvial Channel, Heavy oil, API variation (12 to 21), Unconsolidated sand, Very high permeable sand, Tilted WOC.  History match, Prediction, Field development plan, Proposed vertical, deviated and horizontal wells for cold oil production phase. EOR screening.

 

Kuwait Oil Company (KOC),  Great Burgan Field

 Material Balance Investigation For the Great Burgan field, Special Core Analysis.

 

Sakhalin Energy (Gazprom, Shell & Mitsubishi), Pilton, Astokh & Lunskoye - Sakhalin Russia

Simulation Models (Pilton, Astokh & Lunskoye assets) converted from MoReS ( Shell simulator) to Eclipse ( Schlumberger Simulator), tuned for a better history match and forecast.

 

Calvalley LTD -Hishwah field  -  Canada / Yemen

Reservoir simulation modeling of Hishwah field, Light oil, Naturally fractured,  Carbonate reservoir, History match, prediction, field development plan, optimization (36 drilled wells, 30 horizontal  proposed injectors/producers)

 

Petroleos de Venezuela .S.A (PDVSA) - Cristobal field - Venezuela

Simulation modeling for water injection, fluvial channel, PVT variation Vs. depth (60-900CP), Sandstone, high permeable reservoir, 25 wells 15 years history. FDP for five-spot pattern water injection

 

 
Mexican Petroleums (PEMEX),
Panuco field - Mexico

 Simulation study for CSS (cyclic s team stimulation) pilot, Fractured heavy oil (250-1000CP), carbonate, low porosity, over 100 years production history

 Feasibility study, Proposal, Gantt chart preparation for Combustion Pilot Design (Field name is confidential)


Husky Energy, LIoydminster field -  Canada

 Polymer Injection Model, Non-thermal, heavy oil reservoir, Pilot plan (13 horizontal  wells) Sensitivity analysis on Polymer parameters, well spacing, Injection rates


Murphy Oil Company Ltd., Cliffdale field -  Canada

 Cold production simulation model for a heavy oil reservoir, Oil viscosity variation versus depth, Sensitivity analysis on geological model (heterogeneities & net thickness), well spacing and oil viscosity


Murphy Oil Company Ltd., Seal-area field -  Canada

 Heavy oil simulation modeling for Cycle Steam Stimulation (CSS) of an inverted seven spot pattern. Forecast and sensitivity on boundary condition and reservoir parameters (Steam Injection rate, Oil viscosity, Porosity-Permeability Dilation and Vertical permeability).


Canadian Natural Resources Limited  (CNRL) / Pelican Lake field - Canada

 Eclipse-VISAGE couple modeling, Converting CMG model into an ECLIPSE format, Heavy oil, Polymer injection, Horizontal wells, History match and Forecast. Eclipse-VISAG (3D geomechanical model) couple modeling, Caprock integrity analysis, Maximum injection rate based on rock failure.


Canadian Natural Resources Limited  (CNRL) / Primose Lake field - Canada

 Eclipse-VISAG(3D geomechanical model) Coupling

Russian-BP oil company (TNK-BP), Russkoye field - Russia

 EOR Screening, One of the biggest fields in Russia, Complicity of heavy oil, permafrost, gas cap, high shalyness


Korean National oil Company (KNOC), Black gold field -  Canada

 Integrated Reservoir simulation study of SAGD(Steam assisted gravity drainage) and wellbore design project. Multi-segment modeling  from reservoir to the surface (by Eclipse and PipeSim), Feasibility study on ICD design, modeling steam injection plan (three pilots)


SACS-Saline Aquifer CO2 Storage modeling (Co2 storage) -  Canada

CO2 Storage, fractured carbonated saline aquifer, low porosity, prediction of CO2 plume migration, Co2 trap, solubility of CO2 and acidity(PH) of aquifer  (by Eclipse simulator)


Nexen Inc. - Plover lake field, worm hole modeling -  Canada

Modeling of a cold heavy oil production with sand (CHOPS), comparison of black oil and thermal model. history match for 80 wells


Geomechanical impact on SAGD- VISAGE_E300 Coupling - Coupling of VISAGE with a thermal model (by Eclipse and VISAGE)


Husky Energy -Tucker Lake field - Canada

SAGD modeling of heterogeneous reservoir, high water saturation, sandstone reservoir   (by Eclipse simulator)


Carbon Capture model study/Wabamun formation - Canada

CO2 Storage, Sandstone reservoir, prediction of CO2 plume migration, CO2 trap, solubility of CO2 and acidity of aquifer (by Eclipse simulator)


Calvalley LTD -Hishwah field -  Yaman

Full field Reservoir simulation study of Hishwa field, Light oil, Naturally fractured, Carbonate reservoir, History match, prediction, development plan, optimization (30 drilled wells, 51 proposed injectors/producers)


Pengroth Energy Trust- Lindbergh field - Canada (LIoydminster)

Model study of a cycle steam stimulation, feasibility study of SAGD method (by Eclipse simulator)


ENCANA/Weyburn field - Canada

Converting the simulation model (Carbonate reservoir, CO2 injection) into a fracture model, monte Carlo simulation, uncertainty analysis on water saturation


OilSands Quest Inc/Axe Lake - Canada,  MacMurry formation

Simulation modeling of a test site, bitumen, none-sealed overburden (by Eclipse simulator)


PetroSA (Petroleum Oil and Gas Corporation of  South Africa) - South Africa

Reservoir evaluation based on a model study of a cycle steam stimulation. fractured, low porosity, Carbonate Reservoir (by Eclipse simulator)


WNPOC (White Nile Petroleum Operating Company (Sudan) /Thar Jath  field  -  Sudan

Integrated model study of Thar Jath field,  heavy oil, high shalyness, heterogeneous PVT, thermal Enhance Oil Recovery method (by Eclipse simulator)


Trilogy Energy corp./ Simonetta field - Canada

Integrated model study of Simonetta field.  carbonate, low porosity fractured and volatile oil reservoir, Prediction cases for reservoir management, optimize production and Infill drilling

(by Eclipse simulator)


Caltex project - Canada

 Single well model,  black oil, water conning study (by Eclipse simulator)


Nexen  Inc. / Benchmark project - Canada

SAGD Simulation model in eclipse and compare with CMG model, sensitivity of sub-cool temperature in a 2D and 3D SAGD models  - Canada


Encana/SIS test model - Canada

Multi-segment well modeling for Encana SAGD project (SIS project)


Tanganyika oil company Ltd ./Tishrin field - Syria

Full field model study,  low porosity fractured, a heavy oil reservoir in Syria. History match of 50 wells. Development plan for 500 wells


DCS/ CHOPS - Canada (LIoydminster)

Developing of CHOPS modeling (Heavy Oil production with Sands) by eclipse, model study for Merango field (A CHOPS Model for Wormhole)


Internal Projects  (DCS_France) -  France

Well Test Analysis, Fluid characterization, Special core analysis


Canadian Natural Resources Limited  (CNRL) /Dawson field - Canada

Simulation study of Dawson field, carbonate reservoir, model construction for a heterogeneous fractured carbonate, high permeable streak, water injection optimization (by Eclipse simulator)


• Shining Back Co.  (CNRL) /DPembina field - Canada

Modeling of three pools (gas & oil pools), partially connected to each other. 

 

• Batex Energy Ltd. / Red Earth field - Canada

Feasibility study of water injection Secondary recovery study in Red Earth field

 

 

• National Iranian Oil Company (NIOC) / SIRI-D,  Soroosh  & Bahregan Sar Fields - Iran

Full field model study

 

• -- Company  / Aerial field - Canada

Reservoir simulation study of Aerial Field (Eclipse simulator) Geology assistance, Petrophysical properties mapping, Geological model, Core analysis (SCAL & Conventional), initial contact levels, porosity - permeability relationship, reservoir fluid characterization, well performance analysis, initial fluid in place calculations, material balance, course grid modeling, initialization and debugging of model, history matching in field, region and well scale, model calibration, define and tuning of scenarios, sensitivity for different scenarios, economic data generation for evaluation model.

 

 

Pennwest, Cardium formation

  • Hydraulic fracture modeling to history match a case with more than 40 wells

     

Pouce Coupe, Montney formation

  • Traditional and modern analysis of pressure transient and production data such as RTA, PTA, DCA to analytically calculate dominant flow regimes, permeability, EUR, fracture conductivity, fracture half-length

     

Kuwait Oil Company, Umm- Niqa field

  • Optimization of surface location, spacing and number of vertical, deviated, and horizontal wells to be drilled

  • Well trajectory design considering costs, surface restrictions, and geological targets

  • Estimation of hydrocarbon reserves, construction of oil column thickness, sweet spots, and net pay maps

  • Analysis of MDT, RFT, DST, production, and welltest data to determine formation pressure and fluid contacts

  • < >nd-point scaling of relative permeability and capillary pressure curves to match initial reserves 

     

Husky Energy, Atlantic offshore

  • Proposed and designed ICD-equipped, multi-lateral wells to improve oil production and reduce watercut

 

Suncor, Firebag

  • NPV model construction based on fixed and operational costs to dynamically monitor economic indicators

 

ARC resources, Leduc formation

  • Screening of EOR processes (WAG, chemical, thermal) based on their applicability to the field

  • Ranking of EOR agents (polymer, surfactant, foam, CO2, N2) based on compatibility and micro scale performance

  • Feasibility and economic Study for CO2 injection in a reef structure in the Redwater field in Alberta

  • Characterization and modeling of a near-critical reservoir fluid using EOS tuning for CO2 injection

 

Tundra Oil and Gas, Daly Sinclair field

  • First- and multiple-contact miscibility regions determination using P-T, P-x and ternary diagrams for CO2 injection

  • Modeling and matching slim-tube experimental data to determine MMP and recovery for different solvents

  • Experimental PVT data Matching such as CCE, CVD, DL, and swelling tests using commercial PVT packages

 

 

Athabasca Oil, Hangingstone area

  • Simulation of SAGD start-up circulation phase using dual-tubing well configuration to determine injectivity, steam retention, and match initial steam chamber size

  • SAGD pad modeling with 6 wellpairs using multi-segmented wellbore model to determine the onset of steam chamber coalescence

     

Devon Energy, Jackfish area

  • Simulation and history matching of SAGD process and thermocouple data (DTS) towards reducing the risk of hot spots in the producer well in Jackfish area

  • Optimization of number and size of inflow control valves (ICD) in the thermal wellpairs

 

JACOS, Hangingstone

  • Performance and economic analysis of solvent-steam coinjection with steam injection in SAGD proces

 

 

.

Geomechanical Modeling

Canadian Natural Resources Limited  (CNRL) / Pelican Lake field - Canada

 Eclipse-VISAGE couple modeling, Converting CMG model into an ECLIPSE format, Heavy oil, Polymer injection, Horizontal wells, History match and Forecast. Eclipse-VISAG (3D geomechanical model) couple modeling, Caprock integrity analysis, Maximum injection rate based on rock failure.


Canadian Natural Resources Limited  (CNRL) / Primose Lake field - Canada

 Eclipse-VISAG(3D geomechanical model) Coupling.

 

Pelican Lake – Canada

Polymer Injection, Non-thermal 4D Caprock Integrity.

 

Harmattan – Canada

Wellbore Stability Analysis.

 

Deep Basin-Waterton – Canada

WBS and Fault Reactivation study.

 

Mannville-Mikwan – Canada

CBM deposit Initiative Stimulation Design, 2-D numerical modeling

 

BlackGold – Canada

Thermal 4D Caprock Integrity.

 

Hinton-Cabin Creek – Canada

Non-Productive Drilling Time Optimization project.

 

Chinook Ridge – Canada

Tight Gas Stimulation and Fracture Characterization (Phases I & II).

 

Weyburn – Canada

Induced Fracture and Out of the zone CO2, VISAGE modeling.

 

Pembina Cardium – Canada

Horizontal Multi-Stage Stimulation Design (1-D Mechanical Earth Modeling).

 

Horn River Basin – Canada

Multi-Well Directional Drilling Wellbore Stability Analysis and DrillMAP reports.

 

? Carbon Services_Aquistore 4D Geomechanical caprock integrity project.

 

 

 

 

LAB Experience

Horn River BasinCanada

Designed core testing protocol.  Quality controlled and cross-referenced data.  Highlighted intervals with major mineralogical and organic matter variation. Reported GIP.

 

Duvernay – Canada

Designed core testing protocol, established organic thermal maturity via REVAL, vitrinite reflectance, and saturations.  Evaluated porosity and permeability distribution with an association to organic and mineralogical maturity. 

                                                                        

  • Routine and special core analysis: porosity, liquid / gas permeability, capillary pressure, and relative permeability measurements for Ahvaz (fractured carbonate) and Parsi (tight carbonate) fields

                                                                       

  • Complete PVT tests such as flash (CCE), differential vaporization, constant volume depletion (CVD), and viscosity measurements of Mansouri reservoir, Ilam formation (100000+ bbl/day, 5200 psi, 222 oF) and Ab-Teymur reservoir, Sarvak formation (45000 bbl/day, 4600 psi, 236 oF

 

 

  • Mechanical Core Measurement, Testing, Quality Control, Data Reduction, Data Analysis, and Marketing.
  • Geomechanical Modeling, Unconventional/Conventional Completion Design, Well Bore Stability, Thermal and Non-thermal 4D Stimulation/Caprock Integrity Analysis, Advance Sonic Processing.
  • Heterogeneous Rock Analysis, Sample Selection/Recommendation, and Rock Mechanics Testing Condition Modeling.